|
|
|||||||||
|
PART NUMBER:48-1612 |
|||||||||
|
|||||||||
| COMPATIBLE DETECTORS: G-M, proportional, scintillation METER DIAL: 0 - 500 cpm, 0 - 2.5 kV, BAT TEST (others available) MULTIPLIERS: X1, X10, X100, X1000 LINEARITY: Reading within plus or minus 10% of true value with detector connected CONNECTOR: Series "C" (others available) AUDIO: Built in unimorph speaker with ON/OFF switch (greater than 60 dB at 2 feet) CALIBRATION CONTROLS: Accessible from front of instrument (protective cover provided) HIGH VOLTAGE: Adjustable from 200 - 2500 volts (can be read on meter) THRESHOLD: Adjustable from 2 - 60 mV WINDOW: Adjustable from 0 - 60 mV above threshold (can be turned on or off) OVERLOAD: Senses detector saturation. Indicated by red lamp on meter and meter going to full scale (adjustable depending on detector selected) RESPONSE: Toggle switch for FAST (4 seconds) or SLOW (22 seconds) from 10% to 90% of final reading RESET: Push-button to zero meter POWER: 2 each "D" cell batteries (housed in sealed compartment that is externally accessible) BATTERY LIFE: Typically 600 hours with alkaline batteries (battery condition can be checked on meter) METER: 2.5" (6.4 cm) arc, 1 mA analog type CONSTRUCTION: Cast and drawn aluminum with beige polyurethane enamel paint TEMPERATURE RANGE: -4° F(-20° C) to 122° F(50° C) May be certified for operation from -40° F(-40° C) to 150° F(65° C) SIZE: 6.5" (16.5 cm)H X 3.5" (8.9 cm)W X 8.5" (21.6 cm)L WEIGHT: 3.5 lbs (1.6 kg) including batteries |
|||||||||
|
Suggested detectors are listed below and are not included with the survey meter price. An additional charge will be added for each detector ordered.
|
|||||||||
|
|||||||||
|
|
|||||||||
|
Common Meter Dials |
|||||||||
|
|||||||||
|
|
|||||||||
|
|
|||||||||
|
|
|||||||||
| Ordering Info. Manual | |||||||||
|
|
|||||||||
Copyright © 2000 Ludlum Measurements, Inc. For comments or suggestions please contact webmaster at: ludlum@ludlums.com Page last updated: December 2000 |
|||||||||