|
|
||||||||||
|
PART NUMBER:48-1651 |
|||||||||
| INDICATED USE: Gross sample counting; Single channel analyzing COMPATIBLE DETECTORS: G-M, proportional, scintillation CONNECTOR: Series "C" (others available) SCALER: 6 digit LED display providing a range of 0 - 999999 counts SCALER LINEARITY: Reading within plus or minus 2% of true value TIMER: Thumbwheel adjustment from 0 - 999 minutes with selectable divisions of X0.1 and X1 RATEMETER: 0 - 500,000 cpm total range METER DIAL: 0 - 500 cpm; 0 - 2.5 kV; BAT TEST MULTIPLIERS: X1, X10, X100, X1000 LINEARITY: Reading within plus or minus 10% of true value with detector connected RESPONSE: Toggle switch for FAST (4 seconds) or SLOW (22 seconds) from 10% to 90% of final reading ZERO: Push button to zero meter HIGH VOLTAGE: Adjustable from 200 - 2500 volts (will support 60 megohm scintillation loads) THRESHOLD: Voltage sensitive; adjustable from 1.0 - 10.0 WINDOW: Adjustable from 0 - 10.0 above threshold setting (can be turned on or off) DISC(Discriminator): Adjustable from 2 - 100 mV at a threshold setting of 1.0 RS-232: 9 pin connector allowing for printer, or software interface POWER: 95 - 250 VAC 50 - 60 Hz single phase (less than 100 mA) or 4 each "D" cell batteries (housed in externally accessible compartments) BATTERY LIFE: Typically 120 hours with alkaline batteries (battery condition can be checked on meter) METER: 2.5"(6.4cm) arc, 1 mA analog type CONSTRUCTION: Aluminum housing with beige powder coat paint TEMPERATURE RANGE: -4° F(-20° C) to 122° F(50° C) SIZE: 8.5"(21.6cm)H X 5"(12.7cm)W X 9.3"(23.5cm)L WEIGHT: 6.9 lbs (3.1kg) w/o batteries |
||||||||||
|
|
||||||||||
|
||||||||||
|
|
||||||||||
|
Meter Dial |
||||||||||
|
202-026 |
||||||||||
|
|
||||||||||
|
Replacement Parts Cables
|
Software |
|||||||||
|
|
||||||||||
| Ordering Info.; Manual | ||||||||||
|
|
||||||||||
Copyright © 2000 Ludlum Measurements, Inc. For comments or suggestions please contact webmaster at: mtruitt@ludlums.com Page last updated: March 2008 |
||||||||||