The nanoDot™ dosimeters facilitate single-point measurements for diagnostic radiology, therapy, or any radiation monitoring application for skin entrance dose assessment. 

Part Numbers:
Unscreened: 99-9810
Screened: 99-9811

These dosimeters can be read from the MicroStar^® Reader.

** Accuracy values of 15% and 10%, respectively, are likely to result if the new QA prcedures for the MicroStar^® Reader are not followed.

The use of nanoDots in the radiation therapy environment is no longer recommended.

Technical Bulletin

The InLight^® Dosimeters come in a variety of configurations to best suit your occupational and environmental needs.  Each configuration is comprised of a unique combination of slide component containing aluminum oxide detectors and a filter case.  These are then inserted into one of the holder designs to accommodate each application.  

The table below presents each dosimeter configuration offered, a corresponding holder, and reader used to obtain the dose measurement. All (99–98xx) numbers are Ludlum part numbers.